The static electricity generated in the dry environment in winter will adversely affect the production of many enterprises. Therefore, these companies will use ultrasonic humidifiers for humidification to avoid static electricity.

The ultrasonic humidifier uses ultrasonic high-frequency vibration to atomize water into ultra-fine particles of 1 to 5 microns. The water mist is diffused into the air through a pneumatic device, so as to achieve the purpose of evenly humidifying the air.

But sometimes it is found that the ultrasonic humidifier cannot meet the humidification requirements after running for a period of time. why? Is the equipment broken?

In fact, it is not necessarily, it may be a machine failure, or it may be related to improper operation and other reasons.

Reason one

There are many hygroscopic materials in the room: Sometimes there are many hygroscopic materials in the room, such as quicklime, charcoal, paper, etc., which will quickly absorb water vapor, so the humidification effect is not obvious.

Reason two

Humidity setting is too low: In order to solve the drying problem, the humidity setting of the humidifier should be at least about 55%, which can be carried out according to the actual production situation of the enterprise. However, some companies may encounter it after setting, so the set value will drop, resulting in insignificant humidification, so it is necessary to reset the humidification humidity at this time.

Reason three

Excessive changes in indoor temperature: Whether the indoor temperature drops or rises, it will cause changes in indoor humidity. If the indoor temperature drops suddenly, the water vapor in the air will condense into water, so the humidification effect will decrease. If the room temperature is too high, water vapor will evaporate quickly, and the water vapor content in the air will increase. At this time, the air humidity will decrease, the humidification effect will increase, and the humidification effect will not be obvious. Therefore, controlling the indoor temperature is very important to ensure the humidification effect.

Reason four

The air outlet is blocked or the opening is too small: Many humidifiers transport mist through the PVC pipe, so it is necessary to open a mist hole on the PVC pipe. If the fog hole is too small, there will be less fog coming out, which will affect the humidification effect; or the air outlet is blocked, so the fog will not come out. For example, the fleece flying in the textile workshop can easily block the fog hole. Therefore, the diameter should be increased when opening the hole to ensure that the fog hole is not blocked.

Reason 5

The environment is not airtight: When the humidifier is working, the doors and windows are not closed properly, causing outdoor air to enter continuously, causing indoor humidity to be taken out of the outdoor, and the humidification effect is reduced. Therefore, at this time, we need to close the doors and windows, as well as the exhaust equipment to ensure that the humidification environment will not be affected by the fresh outdoor air.

Reason 6

The quality of water will also affect the effect of humidification. Generally speaking, pure water has the best humidification effect, followed by cold boiled water, tap water and surface water. The worst humidification effect is groundwater. Because groundwater contains a lot of minerals, it is easy to form scale, which will block the atomization holes and cause fog. Poor chemical effect, humidification effect will also decrease.

The above is the reason why the ultrasonic humidifier provided by Chunlan humidifier cannot achieve the humidification effect.